CONSTRUCTION Stainless steel base, Stainless Steel head structure 

STANDARD FEATURES Two saw blades • Operation and safety manual • Safety wall poster • End cut safety pusher plate.

SWITCH Toggle, standard, 2HP rated.

HEAD AND DOOR Stainless Steel, entire assembly removable.

BASE STRUCTURE Stainless steel.

BLADE STANDARD Hard tooth, four teeth per inch, 5/8” (16mm) wide, .020″ (0.51mm) thick, 91” (2311.4mm) long (two supplied with each saw).

BLADE SPEED 3000 feet (914m) per minute approx.

BLADE BACK-UP GUIDES Upper and lower blade backup guide assemblies, removable, with long life carbide back-up inserts.

BLADE WHEELS 12” (30.5cm) cast iron, chrome nickel plating, upper wheel assembly lifts out.

BEARINGS Heavy duty tapered roller bearings used in upper wheel and lower bearing housings.

CATCH PAN Poly, extra deep (rounded corners) bone dust pan sealed off from other parts of base, accessible through base hinged door.

CLEANING UNIT Stainless steel body, long life carbide guide insert, stainless steel saw cleaners, removable as a unit for easy cleaning.

DRIVE SYSTEM Non slip silent v-belt, tension adjustable.

LEGS Four (4) stainless steel leg bolt levelers.

MEAT CARRIAGE Stainless steel with nylon guides and steel bearings.

MEAT GAUGE PLATE Stainless steel faced, adjustable from 1/16” (1.59mm) to 6-1/2” (165mm) locks in position, can be disengaged, entire assembly removable for cleaning.

MOTOR COMPARTMENT Sealed off from meat contact areas, easily accessible through removable panel door.

REAR PLATTER All stainless steel, held in place with two push pull hold down stainless steel rods.

SAFETY END CUT PUSHER PLATE Standard, removable.

WEIGHT Uncrated: 308 lbs. (140 kg) approximate; Crated: 342 lbs. (155 kg) approximate: SS Head – add 20 lbs. (9 kg).

DIMENSIONS CRATED L=32” (81.3 cm), W=40” (101.6 cm), H=41” (104 cm).